S6060269
CALVET PRO TG 830°C WITH LEMO CONNECTORS + CALISTO
CALVET PRO TG 830°C WITH LEMO CONNECTORS + CALISTO
The Calvet Pro TG-DSC calorimeter offers versatility and high accuracy for measuring temperature, heat, heat flux, heat capacity, mass changes and evolved gases. It uses a 3D DSC sensor based on an array of thermocouples, enabling complete heat detection during measurements. This sensor is coupled to a symmetrical hang-down balance, the state of the art in thermogravimetry.
Designed to test samples weighing just a few milligrams, it operates over a wide temperature range and can be combined with various types of cells and crucibles. It allows isothermal or temperature scanning measurements between -120 and 830°C, with interchangeable cells adapted to high-pressure (up to 500 bar) and vacuum conditions. Calvet Pro is particularly useful for characterizing materials related to energy and the environment, including catalysts and hydrogen storage materials.
The CALVET PRO analyzer comprises :
- A calorimetric block with a temperature range from ambient to 830°C, and temperature programming from 0.01 to 30°C/min.
- A “3D” fluxmeter DSC sensor with 0.4 µW resolution, equipped with LEMO connectors.
- A symmetrical hang-down balance with electronic resolutions of 0.002 and 0.02 µg, and a measurement range of +/- 200 mg.
- A water cooling circuit, as well as devices for carrier gas scavenging (from 4 to 200 ml/min) and auxiliary gas scavenging (from 0.3 to 16 ml/min), regulated by mass flow meters, with mixing and internal pressure measurement options.
- Automated switching between carrier gas, auxiliary gas and purge.
- A supply kit including 2 sets of 50 aluminum crucibles (270 µl), aluminum lids, alumina crucibles, Incoloy crucibles and various closing tools.
- A set of suspensions for TGA, including two 100 µl alumina crucibles, two 140 µl platinum crucibles and fifty 130 µl aluminum crucibles.
- CS Evolution controller with 32-bit microprocessor, 24-bit A/D converter and Ethernet connection.
- CALISTO software for device control, data acquisition and processing.
- Operating instructions supplied on USB key.
It can be extended with appropriate measuring cells, depending on your application.
Discover more here
Designed to test samples weighing just a few milligrams, it operates over a wide temperature range and can be combined with various types of cells and crucibles. It allows isothermal or temperature scanning measurements between -120 and 830°C, with interchangeable cells adapted to high-pressure (up to 500 bar) and vacuum conditions. Calvet Pro is particularly useful for characterizing materials related to energy and the environment, including catalysts and hydrogen storage materials.
The CALVET PRO analyzer comprises :
- A calorimetric block with a temperature range from ambient to 830°C, and temperature programming from 0.01 to 30°C/min.
- A “3D” fluxmeter DSC sensor with 0.4 µW resolution, equipped with LEMO connectors.
- A symmetrical hang-down balance with electronic resolutions of 0.002 and 0.02 µg, and a measurement range of +/- 200 mg.
- A water cooling circuit, as well as devices for carrier gas scavenging (from 4 to 200 ml/min) and auxiliary gas scavenging (from 0.3 to 16 ml/min), regulated by mass flow meters, with mixing and internal pressure measurement options.
- Automated switching between carrier gas, auxiliary gas and purge.
- A supply kit including 2 sets of 50 aluminum crucibles (270 µl), aluminum lids, alumina crucibles, Incoloy crucibles and various closing tools.
- A set of suspensions for TGA, including two 100 µl alumina crucibles, two 140 µl platinum crucibles and fifty 130 µl aluminum crucibles.
- CS Evolution controller with 32-bit microprocessor, 24-bit A/D converter and Ethernet connection.
- CALISTO software for device control, data acquisition and processing.
- Operating instructions supplied on USB key.
It can be extended with appropriate measuring cells, depending on your application.
Discover more here
Compatible Instruments
Calvet Pro and Sensys
Lead time : 364 days View full details
CALVET PRO TG 830°C WITH LEMO CONNECTORS + CALISTO
Consumables
Spare parts
CALVET PRO TG 830°C WITH LEMO CONNECTORS + CALISTO
Consumables
Spare parts
| PRODUCT ID: | S0812751 |
|---|---|
| PRODUCT NAME: | NICKEL GASKET (O-RING) FOR CLOSING S0812770 OR S0812732 CRUCIBLES |
| PRICE: | €5,30 each tax excl. |
| PRODUCT ID: | S6050194 |
|---|---|
| PRODUCT NAME: | Set for calibration at low temperature: Sn, Pb, In, Zn, Al (not calibrated by certified laboratory). |
| PRICE: | €588,00 each tax excl. |
| PRODUCT ID: | S08HAC17997 |
|---|---|
| PRODUCT NAME: | COVER IN STAINLESS STEEL FOR STAINLESS STEEL CRUCIBLE S08/HAC17996 |
| PRICE: | €8,40 each tax excl. |
| PRODUCT ID: | S08HAC17996 |
|---|---|
| PRODUCT NAME: | STAINLESS STEEL CRUCIBLE 120 MM3 DIAMETER:6.4 MM - HEIGHT: 12 MM UP TO 100 BAR AND 500°C |
| PRICE: | €11,30 each tax excl. |
| PRODUCT ID: | S6058698 |
|---|---|
| PRODUCT NAME: | 400 BAR DOUBLE INLET VESSEL - 600°C - DIAMETER:6.8 MM WITH COPPER GREASE |
| PRICE: | €7.098,00 each tax excl. |
| PRODUCT ID: | S6058255 |
|---|---|
| PRODUCT NAME: | OPTION CALVET PRO SILICA TUBES TG |
| PRICE: | €10.815,00 each tax excl. |
| PRODUCT ID: | S6058235 |
|---|---|
| PRODUCT NAME: | Sapphire heat capacity standard (by set of 10 units) |
| PRICE: | €78,80 each tax excl. |
| PRODUCT ID: | S6058158 |
|---|---|
| PRODUCT NAME: | SET OF 10 INCOLOY CRUCIBLES (VOL: 140MM3; D: 6,8MM, H: 12MM) UP TO 500BAR / 600°C OR 200BAR / 800°C |
| PRICE: | €935,00 each tax excl. |
| PRODUCT ID: | S6038452 |
|---|---|
| PRODUCT NAME: | SEALING TOOL FOR STAINLESS STEEL CRUCIBLES S0812732 AND S0812770 |
| PRICE: | €1.712,00 each tax excl. |
| PRODUCT ID: | S6029405 |
|---|---|
| PRODUCT NAME: | Non-tight crucible with fitted locked stopper with a handle in sintered alumina,170 µl- D:7 |
| PRICE: | €630,00 each tax excl. |
| PRODUCT ID: | S600543 |
|---|---|
| PRODUCT NAME: | SILICA FIXED-BED REACTOR CELL FOR CALVET PRO AND SENSYS EVO |
| PRICE: | €1.974,00 each tax excl. |
| PRODUCT ID: | S1000526 |
|---|---|
| PRODUCT NAME: | SET OF 20 HIGH PRESSURE CRUCIBLES 200 BARS - 400°C RÉF:M130 |
| PRICE: | €5.555,00 each tax excl. |
| PRODUCT ID: | S1000340 |
|---|---|
| PRODUCT NAME: | SET OF 20 HIGH PRESSURE CRUCIBLES 200 BAR - 400°C F130 |
| PRICE: | €3.150,00 each tax excl. |
| PRODUCT ID: | S0957109 |
|---|---|
| PRODUCT NAME: | INTERMEDIATE THREADED PART FOR DOUBLE INLET VESSEL S60/58698. |
| PRICE: | €924,00 each tax excl. |
| PRODUCT ID: | S0957108 |
|---|---|
| PRODUCT NAME: | CRUCIBLE FOR DOUBLE INLET VESSEL S60/58698 |
| PRICE: | €872,00 each tax excl. |
| PRODUCT ID: | S08HBB37409 |
|---|---|
| PRODUCT NAME: | SET OF 100 ALUMINUM COVERS D: 6,7, STAMPED, NON-TIGHT FOR SETLINE DSC AND CALVET PRO |
| PRICE: | €84,00 each tax excl. |
| PRODUCT ID: | S08HAO28479 |
|---|---|
| PRODUCT NAME: | PT/IR10% MESH CRUCIBLE 140 MM3 - DIAMETER:5 MM WITH HANDLE |
| PRICE: | €1.313,00 each tax excl. |
| PRODUCT ID: | S08HAO24746 |
|---|---|
| PRODUCT NAME: | Silica suspension |
| PRICE: | €1.407,00 each tax excl. |
| PRODUCT ID: | S08HAO24726 |
|---|---|
| PRODUCT NAME: | SILICA CRUCIBLE 70 MM3 DIAMETER: 4 MM |
| PRICE: | €118,00 each tax excl. |
| PRODUCT ID: | S08HAO24725 |
|---|---|
| PRODUCT NAME: | Silica tube |
| PRICE: | €373,00 each tax excl. |
| PRODUCT ID: | S08HAC56441 |
|---|---|
| PRODUCT NAME: | ALUMINIUM GASKET (O-RING) FOR SEALING S08/HAC17996 CRUCIBLES |
| PRICE: | €8,90 each tax excl. |
| PRODUCT ID: | S08HAC56225 |
|---|---|
| PRODUCT NAME: | CRUCIBLE IN ALUMINA FOR SENSYS EVO - CALVET PRO SINGLE INLET VESSEL S60/58920. |
| PRICE: | €269,00 each tax excl. |
| PRODUCT ID: | S08HAC27123 |
|---|---|
| PRODUCT NAME: | SINTERED ALUMINA BOAT CRUCIBLE 200 MM3 - DIAMETER:6.5 MM - HEIGHT: 10 MM |
| PRICE: | €1.082,00 each tax excl. |
| PRODUCT ID: | S08HAC17998NIC |
|---|---|
| PRODUCT NAME: | NICKEL GASKET (O-RING) FOR SEALING S08/HAC17996 CRUCIBLE |
| PRICE: | €32,80 each tax excl. |
| PRODUCT ID: | S0812799 |
|---|---|
| PRODUCT NAME: | Platinum handle |
| PRICE: | €89,30 each tax excl. |
| PRODUCT ID: | S0812798 |
|---|---|
| PRODUCT NAME: | Inconel handle |
| PRICE: | €23,90 each tax excl. |
| PRODUCT ID: | S0812797 |
|---|---|
| PRODUCT NAME: | ALUMINUM CRUCIBLE 130 MM3 - DIAMETER:5 MM |
| PRICE: | €10,00 each tax excl. |
| PRODUCT ID: | S0812796 |
|---|---|
| PRODUCT NAME: | PLATINUM CRUCIBLE WITH HANDLE (140 MM3 - DIAMETER: 5 MM). |
| PRICE: | €693,00 each tax excl. |
| PRODUCT ID: | S0812795 |
|---|---|
| PRODUCT NAME: | ALUMINA CRUCIBLE, 100 MM3 - D:5 MM |
| PRICE: | €168,00 each tax excl. |
| PRODUCT ID: | S0812776 |
|---|---|
| PRODUCT NAME: | SILICA TUBE FOR THE FIXED-BED REACTOR CELL S600543 OF CALVET PRO AND SENSYS |
| PRICE: | €998,00 each tax excl. |
| PRODUCT ID: | S0812753 |
|---|---|
| PRODUCT NAME: | Suspension Pt/Rh10% L=50mm |
| PRICE: | €229,00 each tax excl. |
| PRODUCT ID: | S0812745 |
|---|---|
| PRODUCT NAME: | NON-TIGHT PTRH10% CRUCIBLE 285 MM3 - D:7 MM H: 12 MM |
| PRICE: | €956,00 each tax excl. |
| PRODUCT ID: | S0812744 |
|---|---|
| PRODUCT NAME: | Platinum cover with handle - do not need closing tool |
| PRICE: | €299,00 each tax excl. |
| PRODUCT ID: | S0812735 |
|---|---|
| PRODUCT NAME: | STAINLESS STEEL COVER FOR STAINLESS STEEL CRUCIBLES S0812732 AND S0812770 |
| PRICE: | €3,70 each tax excl. |
| PRODUCT ID: | S0812733 |
|---|---|
| PRODUCT NAME: | ALUMINIUM GASKET (O-RING) FOR CLOSING S0812770 OR S0812732 CRUCIBLES |
| PRICE: | €6,60 each tax excl. |
| PRODUCT ID: | S0812732 |
|---|---|
| PRODUCT NAME: | STAINLESS STEEL CRUCIBLE (VOL: 150MM3; D: 6.8MM, H: 12MM) UP TO 100 BAR AND 500°C |
| PRICE: | €7,60 each tax excl. |
| PRODUCT ID: | S0812729 |
|---|---|
| PRODUCT NAME: | ALUMINA BOAT CRUCIBLE 170 MM3- D:7 MM L: 10 MM |
| PRICE: | €102,00 each tax excl. |
| PRODUCT ID: | S0812728 |
|---|---|
| PRODUCT NAME: | Inconel suspension handle for aluminum crucible |
| PRICE: | €19,70 each tax excl. |
| PRODUCT ID: | S0812727 |
|---|---|
| PRODUCT NAME: | SET OF 100 PIERCED ALUMINUM COVERS (HOLE DIAMETER: 0.6 MM) FOR SETLINE DSC AND CALVET PRO |
| PRICE: | €120,00 each tax excl. |
| PRODUCT ID: | S6059097 |
|---|---|
| PRODUCT NAME: | COMPLETE WATER SECURITY DEVICE FOR SENSYS EVO OR LABSYS EVO |
| PRICE: | €480,00 each tax excl. |
| PRODUCT ID: | S6026091 |
|---|---|
| PRODUCT NAME: | Microconnector C9 |
| PRICE: | €331,00 each tax excl. |
| PRODUCT ID: | S0657218 |
|---|---|
| PRODUCT NAME: | 2-CONDUCTOR COMPACT WAGO SPLICING CONNECTOR |
| PRICE: | €1,40 each tax excl. |
| PRODUCT ID: | S0451717 |
|---|---|
| PRODUCT NAME: | BLUE PU TUBE D:8X1.25(5.5/8) |
| PRICE: | €3,30 each tax excl. |
| PRODUCT ID: | S0157083 |
|---|---|
| PRODUCT NAME: | INDICATOR LED RED DIAM 5MM REF: MTE6066N5-UR (REPLACES S01/54610) |
| PRICE: | €5,30 each tax excl. |
NEED ADVICE?
Sometimes it is just easier to talk one-on-one with a knowlegable expert that can help you find the best solution to your needs.
MAINTENANCE & SUPPORT
Our instruments come with a comprehensive range of user services and support. These include a range of maintenance contracts to ensure accuracy and to extend instrument life. We offer training on how to use the solutions and interpret their measurements.